圣霖国际工字钢生产厂来电咨询「多图」

工字钢如名所示，是一种“工”字形截面型钢，上下翼缘内表面有倾斜度，一般为1：6，使得翼缘外薄而内厚，因此造成工字钢在两个主平面的截面特性相差巨大，在应用中难以发挥刚才的强度特性。虽然工字钢市场上上也出现了加厚工字钢，但工字钢的结构已经决定了其抗扭性能短板。有的胶合板是将两个不同纹路的单板贴在一起制成的，所以在选择上要注意夹板拼缝处应严密，没有高低不平现象。

I like the name suggests, is a kind of I-shaped section steel flange on the inner surface of slope is generally 1:6, the flange and the thickness of thin, resulting in two main characteristics of I-beam section plane is huge, just to play strength characteristics in the application. Although the I-steel market has also appeared to be thickened I-steel, the structure of I-steel has already determined its torsional performance.

H型钢属于经济裁面型材(其它还有冷弯薄壁型钢、压型钢板等)，由于截面形状合理，它们能使钢材更高地发挥效能，提高承裁能力。

H steel is an efficient and economical cutting section (other cold-formed thin-walled steel and profiled steel sheets). Because of the reasonable shape of the section, they can make the steel play a more effective role and improve the bearing capacity.

H型钢的翼缘都是等厚度的，有轧制截面，也有由3块板焊接组成的组合截面。工字钢都是轧制截面，翼缘内边有1：10坡度。

Ｈ型钢的轧制不同于普通工字钢仅用一套水平轧辊，由于其翼缘较宽且无斜度(或斜度很小)，故须增设一组立式轧辊同时进行辊轧。

The flange of the H steel is equal thickness, has a rolling cross section, and a  section of 3 plates. The I-steel is the rolling section, and the inner edge of the flange has the 1:10 gradient.

The rolling of H steel is different from ordinary I-beam only with a set of horizontal rolls. Because of its wide flange and no slope (or very small slope), a group of vertical rollers should be set up and rolled at the same time. 

装饰单板贴面胶合板（装饰面板、贴面板），是将精密刨切成厚度为0.2 mm以上的薄木皮，以胶合板为基材，经过胶粘工艺制作而成的具有单面装饰作用的装饰板材。

Decorative veneer veneer plywood (decorative panel, veneer) is a decorative plank which is made of a veneer with a veneer of 0.2 mm thickness and plywood as the base material.