驱动电机斜置在锯机底座上，通过伞齿轮及主传动轴带动锯片，锯片由液压装置锁紧在传动轴上。锯片进锯由液压驱动，进锯速度根据锯切阻力由比例阀调节。当轧件断面较大、锯切阻力高时，进锯速度慢，反之，进锯速度块。

The driving motor is inclined on the base of the saw machine, and the saw blade is driven through the bevel gear and the main drive shaft, and the saw blade is locked on the drive shaft by the hydraulic device. The sawing saw is driven by hydraulic pressure, and the speed of the saw is adjusted by the proportional valve according to the cutting resistance. When the section of the rolled piece is large and the cutting resistance is high, the speed of the saw is slow, and conversely, the speed block of the saw.

连续加热炉连续加热炉包括推钢式加热炉、步进式炉、转底式炉、分室式炉等连续加热炉，但习惯上常指推钢式炉。连续加热炉多数用于轧制前加热金属料坯，少数用于锻造和热处理。

It is named according to the varieties of rolling, the type of rolling mill and the nominal size. The principle of "nominal size"

For rolling mills, they are named after the gear ring and the pitch diameter of the herringbone gear.

四棍轧机的工作辊直径较小，传递轧制力矩，轧延压力由直径较大的支承辊承受。这类设备的主要优点是相对刚度较大，压下量大、轧延力小，可轧制较薄的板材，也包括有可逆和连轧两种。

The working roll diameter of the four bar mill is small, and the rolling torque is transferred. The rolling pressure is borne by the backup roller with larger diameter. The main advantages of this type of equipment are relatively large stiffness, large reduction, low rolling force, thin rolled sheets, and reversible and continuous rolling two.

六辊轧机，轧机专业厂家介绍，这种轧机的辊系相对来说比较稳定，而且其主要是由一对工作辊和两对支承辊组成。不过，其在操作上有着诸多不便，因此应用并不广泛，通常是用于轧制海底电缆的铜带。

Six-high mill, rolling mill professional manufacturers that the roll system of this mill is relatively stable, and it mainly cists of a pair of work rolls and two pairs of backup rolls. However, it has many inconveniences in operation, so it is not widely used, usually used for rolling high-precision submarine cable copper strip.